Entwicklungsumgebung M33
English
Newsletter
Quick recording
BOM-Tool
Plica AG
Compare
Shopping cart 0
    Subtotal 0.00
    Go to shopping cart

    Neue Generation Kabelschutz - FIPSYSTEMS

    FRÄNKISCHE INDUSTRIAL PIPES GMBH & CO. KG 

    4 generations of leadership in cable protection

    The pioneer in corrugated pipe technology is launching a plug and play IP69 cable protection system with the new FIPLOCK ONE connection screw system. The high-quality sealing element and tried and tested 360° locking element that can be removed with a conventional screwdriver not only give the system the highest sealing values, but also enormous tear resistance. The deep and wide product range is available in different thread types, such as metric, PG, and NPT.


    The FIPLOCK ONE range offers the following advantages 
    • Secure and reliable
    • Meeting highest fire protection requirements 
    • Pre-installed and ready for mounting
    • Quick and simple installation
    • Low handling effort
    • Less storage effort due to the one-in-all IP69 solution
    • Cost savings

    The plastic cable system is suitable for all industrial application areas

    Contact us  

    The FIPLOCK products represent highest quality and suitability for practical use. The innovative overall range offers anything required for professional use. May we help you choose the right product for your application? Our specialists will gladly support you and develop a solution to match your application. Please call us or complete our contact form. Thank you!

    Filter
    Category
    Produkttyp
    73 Products
    • COPA-H - Attachment clip
      COPA-H - Attachment clip
      The clip COPA-H is a one-part corrugated tube attachment clip of specially modified, unhalogenated PA6. Its reinforced bottom plate makes it easy to install in applications. The resealable lid attached directly to the lid ensures very good tightening forces and a simple and safe installation with corrugated tubes in fine and coarse profiles. (F) => Matching fine profile F. (C) => Matching coarse profile C.
      from 
      CHF 
      6.00
       / 1
      from 
      CHF 
      6.00
       / 1
      9 Versions
    • COPA-S - Attachment clip
      COPA-S - Attachment clip
      Der Clip COPA-S is a one-part corrugated tube attachment clip of specially modified, unhalogenated PA6. The resealable lid attached directly to the lid ensures very good tightening forces and a simple and safe installation with corrugated tubes in fine and coarse profiles. (F) => Matching fine profile F. (C) => Matching coarse profile C.
      from 
      CHF 
      5.50
       / 1
      from 
      CHF 
      5.50
       / 1
      16 Versions
    • CPSZ - Clamp
      CPSZ - Clamp
      The CPSZ clamps made of galvanized steel with free-halogen EPDM are used to connect statically installed corrugated conduits with fine and coarse profile of NW07 – NW48. Suitable to fine profile and coarse profile.
      from 
      CHF 
      24.70
       / 1
      from 
      CHF 
      24.70
       / 1
      15 Versions
    • CUSZ - Clamp
      CUSZ - Clamp
      The CPSZ clamps made of galvanized steel with free-halogen EPDM are used to connect statically installed corrugated conduits with fine and coarse profile of NW07 – NW48. Suitable to fine profile and coarse profile.
      from 
      CHF 
      20.80
       / 1
      from 
      CHF 
      20.80
       / 1
      6 Versions
    • PETP - Conduit edge protection
      PETP - Conduit edge protection
      The elastic conduit edge protection, made of thermoplastic elastomer (TPE), is self-extinguishing, free-halogen and protects sensitive cable and wire insulation at the conduit exit. PETP must be installed thightly. Cutting edges at the conduit ends are covered and damaging of the cables and wires at vibrations and heavy movements can be avoided. PETP is easy to install on conduits with fine and coarse conduit profiles and available in standard colour black.
      from 
      CHF 
      8.35
       / 1
      from 
      CHF 
      8.35
       / 1
      8 Versions
    • PTTP - Conduit termination sleeve
      PTTP - Conduit termination sleeve
      The elastic conduit termination sleeve, made of thermoplastic elastomer material (TPE), is self-extinguishing, free-halogen and protects conduits against ingress of dirt and dust. PTTP can be cut to fit onto the desired diameter of the applied cable or cable bundle and must be installed thightly. PTTP suits to conduits with fine and coarse profiles, standard colour black.
      from 
      CHF 
      8.90
       / 1
      from 
      CHF 
      8.90
       / 1
      7 Versions
    • APPA-EPDM, Flange gasket, 90°-flange
      APPA-EPDM, Flange gasket, 90°-flange
      The one-piece 90°-flange cable protection conduit fitting APPA-EPDM, made of specially modified, free-halogen polyamide 6 is self-extinguishing and resistant against most chemical media commonly used. APPA-EPDM is also perfectly suited for outdoor installations. With the brand new 360° interlocking system and an inside conduit seal, APPA-EPDM complies with the highest possible protection class IP69 in combination with our FIPLOCK® corrugated conduits.
      from 
      CHF 
      28.40
       / 1
      from 
      CHF 
      28.40
       / 1
      10 Versions
    • TDPA - Draw-in tool with hole/grip
      TDPA - Draw-in tool with hole/grip
      The TDPA draw-in tool makes it easy to apply in cables in slitted corrugated conduits. The accessory is available with either a hole or a grip and in two different sizes with nominal widths 4.5 to 07 and 07 to 29. G => with grip L => with hole
      from 
      CHF 
      12.70
       / 1
      from 
      CHF 
      12.70
       / 1
      4 Versions
    • AWPA-PGM - 90° Cable Protection Fitting, PG Metal Thread
      AWPA-PGM - 90° Cable Protection Fitting, PG Metal Thread
      The AWPA-PGM cable protection fitting with its 90° angle and PG metal thread offers an ideal solution for cable routing. Made from specially modified, halogen-free Polyamide 6, it is self-extinguishing and resistant to most common chemical media. Its innovative 360° locking system and internal pipe seals, in conjunction with FIPLOCK corrugated tubes, ensure the highest protection class IP69, providing maximum security against dust and water intrusion.
      from 
      CHF 
      51.60
       / 1
      from 
      CHF 
      51.60
       / 1
      4 Versions
    • AWPA-M - 90° Cable Protection Fitting, Metric, IP69
      AWPA-M - 90° Cable Protection Fitting, Metric, IP69
      The AWPA-M 90° cable protection fitting with metric thread, made from specially modified, halogen-free Polyamide 6, is self-extinguishing and resistant to most common chemical media. Its innovative 360° locking system and internal pipe seals, when used with FIPLOCK corrugated tubes, achieve the highest protection class IP69, ensuring superior protection against dust and water intrusion. UV-resistant and suitable for a temperature range of -50 to +120 °C.
      from 
      CHF 
      25.75
       / 1
      from 
      CHF 
      25.75
       / 1
      12 Versions
    • ASPA-M - Straight Cable Protection Fitting, Metric, IP69
      ASPA-M - Straight Cable Protection Fitting, Metric, IP69
      The ASPA-M cable protection fitting with metric threading, made from specially modified, halogen-free Polyamide 6, provides a secure and reliable cable protection solution. This self-extinguishing fitting is resistant to most chemical media and, with its 360° locking system and internal pipe seals in conjunction with FIPLOCK corrugated tubes, meets the highest protection class IP69. Suitable for operating temperatures from -50 to +120 °C, it is ideal for various demanding applications.
      from 
      CHF 
      14.05
       / 1
      from 
      CHF 
      14.05
       / 1
      32 Versions
    • ASPA-MMK - Straight Cable Protection Fitting, Metric with Short Metal Thread
      ASPA-MMK - Straight Cable Protection Fitting, Metric with Short Metal Thread
      The ASPA-MMK cable protection fitting features a metric short brass thread and a body made from specially modified, halogen-free Polyamide 6, providing a premium cable protection solution. Self-extinguishing and resistant to chemicals, with a 360° locking system and internal pipe seals, it meets the highest protection class IP69. When used with FIPLOCK corrugated tubes, it ensures maximum protection against dust and water ingress. UV-resistant and suitable for a temperature range of -50 to +120 °C, it is perfect for demanding applications.
      from 
      CHF 
      39.95
       / 1
      from 
      CHF 
      39.95
       / 1
      28 Versions
    Besoin d'aide ??

    Nous sommes là pour vous et serons heureux de vous conseiller. Appelez-nous, envoyez-nous un message ou laissez-nous vous rappeler.

    Horaires d'ouverture

    Lundi à Vendredi

    7h00 - 12h00 / 13h00 - 17h15

    +41 (0)52 723 67 20
    Request a callback
    Send an email
    Plica AG
    Back to the overview
    Products
    Plica AG